Bunn 36900.0000 iMIX-3 Cappuccino / Espresso Machine Hot Beverage Dispenser with 3 Hoppers
- Easy installation with a spring-loaded, all-metal auger drive system.
- Low product detection system notifies you audibly and with a message on the display when hoppers are running low.
- Adjustable cup clearance at 7.25″ (18.4cm) to fit popular cup sizes, and can be adjusted up to 8.12″ (20.6cm).
- Auger motors with RPM feedback monitoring ensure consistent flavors and profits by controlling powder dosing.
- Convenient front access to tank drain, dump valves, auger and whipper motors, and control board for easy service setup and calibration.
- Eye-catching LED lighted front graphics for effective merchandising.
- Three hoppers with a capacity of 8lb (3.6kg) each.
- Alphanumeric display provides advertising messages, machine status, and technical support contact information.
- 4.4gal (16.7L) hot water tank to handle high-demand serving times.
- Night mode to prevent theft or unauthorized use.
- High-speed heavy-duty whipper for thorough product mixing.
| Quantity | 1/Each |
|---|---|
| Shipping Weight | 90 lb. |
| Width | 12 1/2 Inches |
| Depth | 24 Inches |
| Height | 32 3/4 Inches |
| Height to Dispenser | 7 1/4 Inches |
| Amps | 15 Amps |
| Hertz | 60 Hertz |
| Phase | 1 Phase |
| Voltage | 120 Volts |
| Wattage | 1,800 Watts |
| Beverage Type | Cappuccino |
| Capacity per Hopper | 8 lb. |
| Features | Made in America NSF Listed |
| Number of Hoppers | 3 |
| Output | 4.5 Gallons Per Hour |
| Pressure | 20 – 100 PSI |
| Tank Capacity | 4.4 Gallons |
| Temperature Settings | Adjustable |
| Type | Cappuccino Dispensers |
| Water Source | Direct Connection |







Reviews
There are no reviews yet.